Home / Sliding Window / sensational sliding door window treatment ideas / Half Door Window Curtains Kitchen Door Curtains Patio Door Window Treatments French Window Blinds Sliding Glass Door Blinds Sliding Window Panels Glass Door Coverings
Guillaume Roussel Sliding Window July 10th, 2018 - 01:01:07
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
The kitchen sliding windows are made of two sashes that can slide horizontally over each other. There is a track that allows the left and right movement of the windows. You can add more that two sashes to make your windows taller and wider. Since the track that is made for sliding of the sashes is little above the ground it doesnt allow the dust to settle on it. This way it becomes easier to maintain the windows and dust will never jam the working of the windows thus increasing its life.
Casement Windows. Open all the way outward hence allow maximum light and air. Energy efficient because they shut tight. Can be glazed to save energy. Easy to use as a simple crank mechanism is used. Disabled people can operate them easily. Cleaning is easy therefore ideal for installing behind sinks and countertops. Allows for quick and easy emergency escapes. Greater aesthetic customization lend themselves to a variety of designs colors and materials. Use mechanical parts that need maintenance
To install sliding window locks you need the following tools: Sliding windows can be lifted to varying degrees within their track. If you are using the venting position it is a good idea to fit something in the track to stop the window from being lifted. Small blocks of wood or plastic or just a screw can be used. If fitted correctly this can make the window a lot more secure especially when locking the window in the open position.