Home / Sliding Window / sensational sliding door window treatment ideas / Sliding Glass Door Treatments Front Door Window Curtains Patio Door Curtain Rods Sliding Glass Door Curtains Window Coverings For Sliding Glass Doors Door Window Coverings Door Window Treatments
Guillaume Roussel Sliding Window July 10th, 2018 - 01:16:35
Remove The Windows. You can easily remove the windows by sliding it open past the lift blocks and then placing your hands on either side of the window and lifting it out of its track. You can then remove the window towards you. Do the same with the other window and place them in a safe area. Proceed With The Washing. Wash them using a window cleaning solution and a nonlint cloth. Make sure to thoroughly clean the glass and remove any stains that you will find. Start from the upper left corner of your window glass and proceed downward using an Sshaped motion for wiping the window.
To install the track you need a secure surface to mount it too. Make sure your blinds came with all the parts you will need like bracket screw mountings for wood installation. Some paper windows come with a swivel bracket so they can be opened horizontally and pivoted open. You need a minimum distance between the swivel and the walls to allow the doors to open. The number of tracks roughly equates to how solid the window covering will be.
You will then need to install the panels into the rails. This can be hard because they are designed to not fall out. There may be Velcro strips you can install on the inside of the head rail to secure the windows. This should also let you slip in the panels. The valance returns attach to joiners but you may have to trip excess fabric. Woven wooden valances come with an aluminium L joint in the corner that inserts into the panel. The last step is to install the cords which move the panels along the track.
You will have to gently raise the unit and slide the same in support brackets. Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required just attach the extensions on the side wall by using the wood screws. If necessary attach the extensions on the side wall using wood screws. Perform application blocking. Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.