Marc Girard Sliding Window July 10th, 2018 - 23:44:15
Next you need to install the head rail. Just like the lower track the pivot brackets must be a few inches from the wall. Sometimes you may need more than one track to cover a room. This also allows the window panels to be stacked upon each other. If you want to add an additional valance to the mix make sure you use one that is deigned for that window panel. Otherwise it will not fit correctly.
At first you will be having a hard time removing and placing the windows back in place. You need to learn how to work on them which later on can be easier. Cleaning these kinds of windows is not that easy especially if you are doing it alone. You need to develop certain skills to be able to perfectly finish the cleaning. Sliding panels are a great alternative to window blinds and horizontal window doors. They have a softer look than glass and can also be great accents in an Asian themed decor. Sliding panels have that special ability to be both wall and window at the same time. They filter light and provide privacy at the same time.
You then use a dry non lint cloth or those absorbable cloth used in cleaning cars to dry your window. Dont forget to also clean the track where the window is and the area around it. Place Your Windows Back. After the cleaning and drying is done you need to put them back together. Put your windows back following a reverse order of how you removed them. You need to make sure that the sliding windows are reinstalled securely and there will be no chances of them being accidentally removed.
Sliding window locks are often called vent locks as they allow the window to be locked slightly open for ventilation. The recommended gap is 100mm but never have more than 150mm. The theory is that if a head can get through a window a person can squeeze through. The venting position is not as secure as when the window is shut and locked. Therefore you should only leave your windows locked open you are at home.